Impedimetric Detection of DNA Damage with the Sensor Based on Silver Nanoparticles and Neutral Red

Novel electrochemical DNA‐sensor based on glassy carbon electrode (GCE) modified with Ag nanoparticles, Neutral red covalently attached to its surface and native DNA adsorbed on modifier coating was developed for the estimation of DNA damage on example of model system based on Fenton reagent. As was shown, the oxidation process resulted in synchronous increase of electron transfer resistance and capacitance measured by electrochemical impedance spectroscopy (EIS). The contribution of each sensor component on the signal was specified and sensitivity estimated against similar surface coatings. The shift of EIS parameters was found to be higher than that of similar biosensors reported. The DNA sensor was tested on the estimation of antioxidant capacity of green tea infusions again the results of coulometric titration with electrogenerated bromine.     

Determination of Allura Red and Tartrazine in Food Samples by Sequential Injection Analysis Combined with Voltammetric Detection at Antimony Film Electrode

An antimony film electrode prepared on‐line and installed as part of a sequential injection system, was used as an electrochemical detector to determine azo dyes in food samples. The influence of several flow variables were evaluated using a central composite design. In optimal conditions, the linear range of the calibration curve varied from 1–5 µM, with a limit of detection limit of 0.3 µM. The relative standard deviation of analytical repeatability was <5.0 %.The method was validated by comparing the results obtained with those provided by HPLC; no significant difference were seen.     

美丽红色胭脂 魅力红色化学*

介绍了中国胭脂的演变简史,以化学视角对胭脂的发展进行分类:无机胭脂、有机胭脂(天然植物胭脂、有机合成类胭脂)等。进行模拟实验研究,探究胭脂制作工艺流程,分析胭脂中红色物质的成分和显色机制。阐述每个阶段胭脂的不足之处,科普胭脂中的红色化学知识,体会化学对美和健康的重要意义,感受化学的无穷魅力。     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

A simple method for removal of toxic dyes such as Brilliant Green and Acid Red from the aquatic environment using Halloysite nanoclay

This project explains an easy, simple and eco-friendly method to remove some toxic dyes like Brilliant Green and Acid Red from aquatic solution by technique of solid-phase extraction that uses Halloysite nanoclay eco-friendly solid phase as absorbent surface for adsorption of dye. The physical properties of the HNC such as scanning electron microscopy, transmission electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy, and surface area analysis were studied. The best conditions like pH of the solution, HNC weight, contact shaking time, the temperature of the solution, and ionic strength were investigated for removal effectiveness. The experimental data of the adsorption process showed that HNC can remove most of the dyes within 30 min, with an adsorption capacity of 12.5 mg/g for A.R dye and 13.9 mg/g for B.G dye on HNC solid phase at optimum conditions. The removal process of dyes on HNC was studied kinetically and thermodynamically, and the data confirms that the pseudo-second-order kinetic model was able to describe the adsorption process. Thermodynamic data confirms the process was spontaneous andexothermic in nature for A.R dye, while was spontaneous and endothermic in nature for B.G dye. Finally, the effectiveness of HNC was inspected by removing dyes from three various real samples, and the results showed high performance in removing dyes on HNC for four consecutive cycles.     

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

The effectiveness of Congo red (CR) adsorption from aqueous solutions onto MgAl-layered double hydroxide (MgAl-LDH) nanosorbents was examined in this study. MgAl-LDH was synthesized using the hydrothermal method, and physicochemical characterization was performed via powdered X-ray diffraction, high-resolution transmission electron microscopy, Fourier transform infrared analysis, and zeta potential measurements. For optimum adsorption of CR onto the synthesized MgAl-LDH nanosorbent, the adsorption process was employed in batch experiments. Adsorption parameters, such as the adsorbent dosage, solution pH, contact time, and initial adsorbate concentration, vary with the adsorption kinetics and isotherm mechanism. The results of the batch experiments indicated rapid adsorption of CR dye from aqueous solutions onto MgAl-LDH during the first 30 min until equilibrium was achieved at 180 min with a dye concentration of 50 mg/100 mL and MgAl-LDH adsorbent dosage of 0.05 g. The experimental adsorption data fit adequately with the monolayer coverage under the Langmuir isotherm model (R² = 0.9792), and showed the best fit with the pseudo-second-order kinetic model (R² = 0.996). The change in zeta potential confirmed the effective adsorption interaction between the positively charged MgAl-LDH and the negatively charged CR molecules with electrostatic interactions. This work is distinguished by the successful hydrothermal preparation of MgAl-LDH in the form of homogenous nanoscale particles (～100 nm). The prepared MgAl-LDH showed a high adsorption capacity toward anionic CR dye with a maximum adsorption capacity of 769.23 mg/g. This capacity is higher than those reported for other adsorbents in previous research.     

Screening of anti-inflammatory and antioxidant potential of functionalized tetrahydrocarbazole linked 1,2-diazoles and their docking studies

Inflammatory diseases are associated with life-threatening syndromes like hepatitis, cancer, and trauma injury while some decrease the quality of life such as rheumatism, arthritis, and tuberculosis. 1,2-Diazoles (pyrazolines) play a vital role in COX-2 inhibition thus dinitro-tetrahydrocarbazole linked pyrazolines have been synthesized and endeavor to screen for anti-inflammatory, antioxidant and molecular docking studies. For this purpose, 6,8-dinitro-acetyl-2,3,4,9-tetrahydrocarbazole (I), aromatic aldehydes (IIa-e) and hydrazines (IIIa-b) were combined via multicomponent reaction approach under the influence of microwave irradiations to afford pyrazolines (1–10). All new molecules were screened for in vitro anti-inflammatory activity by human red blood cells membrane stabilization, antioxidant potential by2,2-diphenyl-1-picrylhydrazyl,2,2´-azinobis (3-ethylbenzo thiazoline)-6-sulphonic acid, lipid peroxidation, and total antioxidant capacity assays along with cytotoxicity by brine shrimp lethality assay. Molecular docking was performed by using the Auto Dock program. Both disubstituted and trisubstituted diazoles showed excellent membrane stabilizing effects, (91.89 % and 77 %, respectively). The presence of phenol, furan, thiocarbamide, and chloro-moieties have the most prominent effect. Toxicity results indicated that compounds were less toxic at the tested dose (0.1 mg/ml). The antioxidant study showed that compound 2 was more active showing low IC₅₀ values (32.2 and 39.2 µg/ml) in DPPH and total phenolic contents assays respectively. Compound 3 (44.0 µg/ml) showed the highest potential assay in ABTS radical neutralization assay while compound 7 (65.0 µg/ml) showed maximum potential in lipid peroxidation. All diazoles (1–10) were screened for in vitro anti-inflammatory potential where disubstituted diazoles were found better than trisubstituted analogs and exhibited significant antioxidant potential. Molecular docking of diazoles showed a good correlation of their anti-inflammatory activity with p38α MAPK, COX-2, and 5-LOX enzymes that are molecular therapeutic targets of inflammation.     

Interface Amorphization of Two-Dimensional Black Phosphorus upon Treatment with Diazonium Salts

Two-dimensional (2D) black phosphorus (BP) represents one of the most appealing 2D materials due to its electronic, optical, and chemical properties. Many strategies have been pursued to face its environmental instability, covalent functionalization being one of the most promising. However, the extremely low functionalization degrees and the limitations in proving the nature of the covalent functionalization still represent challenges in many of these sheet architectures reported to date. Here we shine light on the structural evolution of 2D-BP upon the addition of electrophilic diazonium salts. We demonstrated the absence of covalent functionalization in both the neutral and the reductive routes, observing in the latter case an unexpected interface conversion of BP to red phosphorus (RP), as characterized by Raman, ³¹P-MAS NMR, and X-ray photoelectron spectroscopies (XPS). Furthermore, thermogravimetric analysis coupled to gas chromatography and mass spectrometry (TG-GC-MS), as well as electron paramagnetic resonance (EPR) gave insights into the potential underlying radical mechanism, suggesting a Sandmeyer-like reaction.     

硫鸟嘌呤修饰的Mn:ZnS QDs磷光探针检测铂(Ⅲ)

通过水相合成法制备了硫鸟嘌呤(TG)修饰的锰掺杂硫化锌量子点(TG-Mn:ZnS QDs)。加入Pt⁴⁺后,Pt⁴⁺会与硫鸟嘌呤上的氮原子结合形成N-Pt⁴⁺配位结构附着在TG-Mn:ZnS QDs的表面,随着Pt⁴⁺浓度的增加,TG-Mn:ZnS QDs-Pt⁴⁺体系发生电子转移而导致磷光逐渐被猝灭,基于此构建了检测Pt⁴⁺的磷光探针。实验中考察了p H、时间对Pt⁴⁺猝灭TG-Mn:ZnS QDs磷光强度的影响。在最佳实验条件下,Pt⁴⁺浓度在0.06~2.4μg/mL范围内与TG-Mn:ZnS QDs的磷光强度呈良好的线性关系y=0.0884x+0.2319,R²=0.991,方法检出限(3σ/n)为1.3μg/mL。该磷光探针适用于实际样品中Pt⁴⁺含量的测定。     

Tunable Linear and Nonlinear Optical Properties from Room Temperature Phosphorescent Cyclic Triimidazole-Pyrene Bio-Probe

Organic materials with multiple emissions tunable by external stimuli represent a great challenge. TTPyr, crystallizing in different polymorphs, shows a very rich photophyisics comprising excitation-dependent fluorescence and phosphorescence at ambient conditions, and mechanochromic and thermochromic behavior. Transformation among the different species has been followed by thermal and X-ray diffraction analyses and the emissive features interpreted through structural results and DFT/TDDFT calculations. Particularly intriguing is the polymorph TTPyr(HT), serendipitously obtained at high temperature but stable also at room temperature, whose non-centrosymmetric structure guarantees an SHG efficiency 10 times higher than that of standard urea. Its crystal packing, where only the TT units are strongly rigidified by π-π stacking interactions while the Pyr moieties possess partial conformational freedom, is responsible for the observed dual fluorescence. The potentialities of TTPyr for bioimaging have been successfully established.